Books in Shelfclass 7.F, Materials science:

Number of books: 222

Shelfclass Sortkey Title
7.F ADAMS, W. WADE The Materials Science and Engineering of Rigid-Rod Polymers: Symposium Held November 28-December 2, 1988, Boston, Massachusetts, U.S.A.
7.F AECM AECM 1989: Third International Symposium on Acoustic Emission from Composite Materials: AECM-3: July 17-21, 1989, Paris, France
7.F ALBRIGHT, LYLE FREDERICK Processes for Major Addition-Type Plastics and Their Monomers
7.F ALCACER, LUIS The Physics and Chemistry of Low Dimensional Solids: Proceedings of the NATO Advanced Study Institute held at Tomar, Portugal, August 26-September 7, 1979
7.F ALEXANDER, LEROY E X-Ray Diffraction Methods in Polymer Science
7.F ALVINO, WILLIAM M. Plastics for Electronics: Materials, Properties, and Design Applications
7.F ANDREWS, MARK P Sol-gel and polymer photonic devices
7.F ASHBY, MICHAEL F Engineering Materials 1: An Introduction to their Properties and Applications
7.F ASHBY, MICHAEL F Engineering Materials 2: An Introduction to Microstructures, Processing and Design
7.F ASHBY, MICHAEL F. Materials Selection in Mechanical Design
7.F ATWATER, H. A Film Synthesis and Growth Using Energetic Beams: Symposium held April 17-20, 1995, San Francisco, California, U.S.A.
7.F AZÁROFF, LEONID V Electronic Processes in Materials
7.F AZÁROFF, LEONID V Elements of X-Ray Crystallography
7.F AZÁROFF, LEONID V X-Ray Diffraction
7.F BEAM, WALTER R Electronics of Solids
7.F BERNHARDT, ERNEST C Processing of Thermoplastic Materials
7.F BERNS, HANS Ferrous Materials: Steel and Cast Iron
7.F BHAGAVANTAM, S Crystal Symmetry and Physical Properties
7.F BLAKEMORE, J. S Solid state physics
7.F BLOOM, J. M Probabilistic Fracture Mechanics and Fatigue Methods: Applications for Structural Design and Maintenance: A Symposium
7.F BOYD, IAN W. Photochemical Processing of Electronic Materials
7.F BRAGG, LAWRENCE Crystal Structures of Minerals
7.F BRANDES, ERIC A Smithells metals reference book
7.F BREMER, JOHN W Superconductive Devices
7.F BROUGHTON, JEREMY Computer-Based Microscopic Description of the Structure and Properties of Materials: Symposium held December 2-4, 1985, Boston, Massachusetts, U.S.A.
7.F BRUNDLE, C. RICHARD Encyclopedia of Materials Characterization: Surfaces, Interfaces, Thin Films
7.F BRYSON, WILLIAM E. Heat Treatment, Selection, and Application of Tool Steels
7.F BULLENS, D.K Steel and Its Heat Treatment: volume III: Engineering and Special Purpose Steels
7.F BULLENS, D.K Steel and Its Heat Treatment: volume II: Tools, Processes, Control
7.F BULLENS, D.K Steel and Its Heat Treatment: volume I: Prinicples
7.F BUNSHAH, ROINTAN FRAMROZE Deposition Technologies for Films and Coatings: Developments and Applications
7.F BURKE, JOHN J Application of Fracture Mechanics to Design
7.F CAHN, R. W. High-Temperature Structural Materials
7.F CALLISTER WILLIAM D., JR. Fundamentals of Materials Science and Engineering: An Integrated Approach
7.F CALLISTER, WILLIAM D. JR. Callister's Materials Science and Engineering
7.F CAMPBELL, PETER Permanent Magnet Materials and their Application
7.F CAMSE CAMSE 1992:1: Computer Aided Innovation of New Materials II: Part 1: Proceedings of the Second International Conference and Exhibition on Computer Applications to Materials and Molecular Science and Engineering - CAMSE '92, Pacifico Yokohama, Yokohama, Japan, September 22-25, 1992
7.F CAMSE CAMSE 1992:2: Computer Aided Innovation of New Materials II: Part 2: Proceedings of the Second International Conference and Exhibition on Computer Applications to Materials and Molecular Science and Engineering - CAMSE '92, Pacifico Yokohama, Yokohama, Japan, September 22-25, 1992
7.F CANTOR, BRIAN Metal and Ceramic Matrix Composites: An Oxford-Kobe Materials Text
7.F CAPRIZ, GIANFRANCO Mathematical Models of Granular Matter
7.F CASCIATI, F Reliability Problems: General Principles and Applications in Mechanics of Solids and Structures
7.F CASPER, LAWRENCE A Industrial Applications of Surface Analysis
7.F CERAMIC TRANSACTIONS Manufacturing of Electronic Materials and Components
7.F CEVIK, SINEM Superalloys for Industry Applications
7.F CHAWLA, KRISHAN KUMAR Composite Materials: Science and Engineering
7.F CHELIKOWSKY, J. R. Electronic Materials: A New Era in Materials Science
7.F CLYNE, T. W Metal Matrix Composites and Metallic Foams: EUROMAT 99 - volume 5
7.F COATES, R. C Structural Analysis
7.F COATINGS Technologies of Coatings and Surface Hardening for Tool Industry
7.F COMPOSITE Composite Materials: Testing and Design: Second Conference
7.F COMPUTERS Computers in Materials Technology: Proceedings of the International Conference held at the Institute of Technology, Linköping University, Sweden, June 4-5, 1980
7.F CORROSION Corrosion 1985: Corrosion Cracking :Proceedings of the Corrosion Cracking Program and Related Papers Presented at the International Conference and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics, and Failure Analysis: 2-6 December 1985, Salt Lake City, Utah, USA
7.F CORROSION Corrosion 1986: Computers in Corrosion Control: Proceedings of the CORROSION/86 Symposium on Computers in Corrosion Control
7.F CRACKNELL, ARTHUR P Crystals and their Structures
7.F CZANDERNA, A. W Methods of Surface Analysis
7.F DANIELS, BRIAN J. Magnetic Materials, Structures and Processing for Information Storage
7.F DAVIS J. R. Surface Hardening of Steels: Understanding the Basics
7.F DAVIS, J. R Aluminum and Aluminum Alloys
7.F DISLOCATIONS Dislocations in Solids
7.F DITTRICH, THOMAS Materials Concepts for Solar Cells
7.F DOWLING, NORMAN E. Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture and Fatigue
7.F DUBOIS, J. HARRY Plastics
7.F EITEL, WILHELM Silicate Science: Volume 1
7.F ELSI ELSI 1979: Proceedings of the Fifth International Conference on Erosion by Liquid and Solid Impact: Newnamn College, Cambridge, UK, 3-6 September 1979
7.F ENGINEERED Engineered 1988: Engineered Materials for Advanced Friction and Wear Applications: Proceedings of an International Conference, Gaithersburg, Maryland, USA, 1-3 March, 1988
7.F ERICKSEN, JERALD L Orienting Polymers: Proceedings of a Workshop held at the IMA, University of Minnesota, Minneapolis, March 21-26, 1983
7.F EUN, JUNG-CHUL (THOMAS) Handbook of Engineering Practice of Materials and Corrosion
7.F EUROMAT EuroMat 1991 V2: EUROMAT 91: Proceedings of the 2nd European Conference on Advances Materials and Processes: Volume 2, Advanced Structural Materials: University of Cambridge, UK, 22-24 July 1991
7.F EUROMAT EuroMat 1991 V3: EUROMAT 91: Proceedings of the 2nd European Conference on Advances Materials and Processes: Volume 3, Advanced Devices and Techniques: University of Cambridge, UK, 22-24 July 1991
7.F EUROTHERM EuroTherm 2000 V1: 3rd European Thermal Sciences Conference: Volume 1: Heidelberg, Germany, 10-13 September, 2000
7.F EUROTHERM EuroTherm 2000 V2: 3rd European Thermal Sciences Conference: Volume 2: Heidelberg, Germany, 10-13 September, 2000
7.F EVANS, ROBERT M. Polyurethane Sealants: Technology and Applications
7.F FAHRENHOLTZ, WILLIAM G. Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications
7.F FARRAR, J. C. M The Alloy Tree: A Guide to Low-Alloy Steels, Stainless Steels and Nickel-Base Alloys
7.F FAULQUES, ERIC Spectroscopy of Superconducting Materials
7.F FIBRE Fibre 1978: Symposium: Jointing in Fibre Reinforced Plastics: 4/5 September 1978, Imperial College, London
7.F FIRE Fire 1974: Fire Retardants: Proceedings of 1974 International Symposium on Flammability and Fire Retardants: May 1-2, 1974, Cornwall, Ontario, Canada
7.F FISHER, J. C. Dislocations and Mechanical Properties of Crystals: An International Conference held at Lake Placid, September 6-8, 1956
7.F FISHER, LAWRENCE W Selection of engineering materials and adhesives
7.F FRADOS, JOEL Plastics Engineering Handbook of the Society of the Plastics Industry, inc.
7.F FRANCO DOS SANTOS, DIOGO MIGUEL Advanced Materials for Electrochemical Energy Conversion and Storage Devices
7.F GARRETT, DONALD E Handbook of Lithium and Natural Calcium Chloride: Their Deposits, Processing, Uses and Properties
7.F GEDDES, BLAINE Superalloys: Alloying and Performance
7.F GILMAN, J. J The Art and Science of Growing Crystals
7.F GOLDING, BRAGE Polymers and Resins: Their Chemistry and Chemical Engineering
7.F GRABOWSKI, KENNETH S Materials Modification by Energetic Atoms and Ions: Symposium held April 28-30, 1992, San Francisco, California, USA
7.F GRANT, NICHOLAS JOHN Rapidly Quenched Metals: Second International Conference, Section I
7.F GUILLET, JAMES Polymer Photophysics and Photochemistry: An Introduction to the Study of Photoprocesses in Macromolecules
7.F GUTOFF, EDGAR B. Coating and Drying Defects: Troubleshooting Operating Problems
7.F GUY, ALBERT G Elements of Physical Metallurgy
7.F HARPER, CHARLES A Handbook of Plastics and Elastomers
7.F HARPER, CHARLES A. Electronic Materials & Processes Handbook
7.F HASEGAWA, GEORGE Studies on Porous Monolithic Materials Prepared via Sol-Gel Processes
7.F HAUSNER, H. Coatings of High-Temperature Materials
7.F HAUSNER, HENRY H. Handbook of Powder Metallurgy
7.F HAZEN, ROBERT M The New Alchemists: Breaking Through the Barriers of High Pressure
7.F HECK, CARL Magnetic Materials and Their Applications
7.F HERTZBERG, RICHARD W Deformation and Fracture Mechanics of Engineering Materials
7.F HIRTH, JOHN PRICE Theory of Dislocations
7.F HOLDEN, A. N Physical Metallurgy of Uranium
7.F HOWELLS, E. R. Technology of Chemicals and Materials for Electronics
7.F HULL, DEREK An Introduction to Composite Materials
7.F HUTCHISON, T. S The Physics of Engineering Solids
7.F IM IM 1989: Proceedings of International Workshop on Intelligent Materials: March 15(Wed.)-17(Fri.), 1989, Tsukuba Science City, Japan
7.F JAMES, R. W The Optical Principles of the Diffraction of X-Rays
7.F JASTRZEBSKI, ZBIGNIEW D Nature and Properties of Engineering Materials
7.F JOSHI, VYDEHI ARUN Titanium Alloys: An Atlas of Structures and Fracture Features
7.F KAWATA, KOZO Composites ´86: Recent Advances in Japan and the United States
7.F KELLER, HEIMO J Low-Dimensional Cooperative Phenomena: The Possibility of High Temperature Super Conductivity
7.F KITTEL, CHARLES Introduction to Solid State Physics
7.F KLUG, HAROLD P X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials
7.F KOHN, J. A Boron: Synthesis, Structure, and Properties: Proceedings of the Conference on Boron
7.F KORHONEN, MATTI Röntgenmetallografia
7.F KUTZ, MYER Handbook of Environmental Degradation of Materials
7.F LEE, HENRY New Linear Polymers
7.F LEVY, F Crystallography and Crystal Chemistry of Materials with Layered Structures
7.F LEVY, SIDNEY Plastics Extrusion Technology Handbook
7.F LIDDELL, DONALD M Handbook of Nonferrous Metallurgy: 1: Principles and Processes
7.F LIDDELL, DONALD M Handbook of Nonferrous Metallurgy: 2: Recovery of the Metals
7.F LIPSON, H The Determination of Crystal Structures
7.F LUNDQVIST, S Proceedings of the Adriatico Research Conference on High Temperature Superconductors: ICTP, Trieste, Italy, 5-8 July 1987
7.F MACKENZIE, D. SCOTT Analytical Characterization of Aluminum, Steel, and Superalloys
7.F MAMLOUK, MICHAEL S. Materials for Civil and Construction Engineers
7.F MASON, WARREN P Physical Acoustics and the Properties of Solids
7.F MATERIAL Material and Capacity Requirements Planning Reprints: Certified in Production and Inventory Management
7.F MATERIALS Materials Research at MIT 2001: Annual Research Digest 2001
7.F MATERIALS Materials Research at MIT 2002: Annual Research Digest 2002
7.F MATERIALS Materials Science and Engineering for the 1990s: Maintaining Competitiveness in the Age of Materials
7.F MATERIALS EXPERIENCE Materials Experience: Fundamentals of Materials and Design
7.F MATERIALS REVIEW Materials Review 1972: Materials Review for '72: Volume 17: National SAMPE Symposium and Exhibition, Biltmore Hotel, Los Angeles, California, April 11-13, 1972
7.F MAT-TEC Mat-Tec 91
7.F MATTOX, DONALD M. Handbook of Physical Vapor Deposition (PVD) Processing
7.F MATTSON, JAMES S Computers in Polymer Sciences
7.F MAYER, JAMES W. Electronic Materials Science: For Integrated Circuits in Si and GaAs
7.F MCHARDY, JOHN Electrochemistry of Semiconductors and Electronics: Processes and Devices
7.F MEETHAM, G. W. Materials for High Temperature Engineering Applications
7.F MESQUITA, RAFAEL A. Tool Steels: Properties and Performance
7.F METALLIC CORROSION Metallic Corrosion 1969: Proceedings of the Fourth International Congress on Metallic Corrosion
7.F MILEWSKI, JOHN O. Additive Manufacturing of Metals: From Fundamental Technology to Rocket Nozzles, Medical Implants, and Custom Jewelry
7.F MILTON, GRAEME W The Theory of Composites
7.F MOTT, N. F The Theory of the Properties of Metals and Alloys
7.F MUKAI, KUSUHIRO Interfacial Physical Chemistry of High-Temperature Melts
7.F MURARKA, SHYAM P. Electronic Materials: Science and Technology
7.F MURR, LAWRENCE EUGENE Frontiers in Materials Science: Distinguished Lectures
7.F NAUMENKO, KONSTANTIN Modeling High Temperature Materials Behavior for Structural Analysis, Part I: Continuum Mechanics Foundations and Constructive Models
7.F NAUMENKO, KONSTANTIN Modeling High Temperature Materials Behavior for Structural Analysis: Part II. Solution Procedures and Structural Analysis Examples
7.F NAVON, DAVID H. Electronic Materials and Devices
7.F OBERG, ERIK Heat-Treatment of Steel
7.F OLSON, DARIN S The sequential deposition of diamond thin films from carbon and atomic hydrogen: a dissertation
7.F ONR ONR Workshop on Energetic Material Initiation Fundamentals: Volume II: Sandia National Laboratories, Livermore, California, 5-9 December, 1988
7.F ONR ONR Workshop on Energetic Material Initiation Fundamentals: volume I: Sandia National Laboratories, Livermore, California, 5-9 December, 1988
7.F PARANTHAMAN, M. PARANS Semiconductor Materials for Solar Photovoltaic Cells
7.F PEARSON, W. B A Handbook of Lattice Spacings and Structures of Metals and Alloys: Volume 1
7.F PEARSON, W. B A Handbook of Lattice Spacings and Structures of Metals and Alloys: volume 2
7.F PEISER, H. STEFFEN X-Ray Diffraction by Polycrystalline Materials
7.F PELLEG, JOSHUA Basic Compounds for Superalloys: Mechanical Properties
7.F PENN, W. S PVC Technology
7.F PETIT, J Fatigue Crack Growth Under Variable Amplitude Loading
7.F POLITZER, PETER Energetic Materials: Part 1: Decomposition, Crystal and Molecular Properties
7.F POLITZER, PETER Energetic Materials: Part 2: Detonation, Combustion
7.F POLLOCK, DANIEL D Physical Properties of Materials for Engineers: Volume II
7.F POLLOCK, DANIEL D Physical Properties of Materials for Engineers: Volume III
7.F POLLOCK, DANIEL D Physical Properties of Materials for Engineers: Volume I: Vol. 1
7.F POLYMER ICT Polymer ICT: Technology of Polymer Compounds and Energetic Materials: 21st International Annual Conference of ICT 1990: July 3 - July 6, 1990, Karlsruhe, Federal Republic of Germany
7.F PRINCE, EDWARD Mathematical Techniques in Crystallography and Materials Science
7.F PYROTECHNICS ICT Pyrotechnics ICT: Pyrotechnics: Basic Principles, Technology, Application: Proceedings 16. Internationale ICT-Jahrestagung 1985, combined with 10th International Pyrotechnics Seminar: July 2-5, 1985, Karlsruhe, Federal Republic of Germany
7.F RAMACHANDRAN, G. N Advanced Methods of Crystallography
7.F RANDELL, D. R Radiation Curing of Polymers: The Proceedings of a Symposium organised by the North West Region of the Industrial Division of the Royal Society of Chemistry, University of Lancaster, 18th-19th September 1986
7.F RANDOLPH, ALAN D Theory of Particulate Processes: Analysis and Techniques of Continuous Crystallization
7.F RANNEY, M. W Fluorocarbon Resins
7.F REED, ROGER C. The Superalloys: Fundamentals and Applications
7.F REINFORCED Reinforced 1982 :The 13th Reinforced Plastics Congress 1982: Hotel Metropole, Brighton, Sussex, England, 8-11 November, 1982
7.F ROBERTS, AARON GENE Organic Coatings: Properties, Selection, and Use
7.F RP/C RP/C 1981: Reinforced Plastics/Composites Institute 36th Annual Conference Preprint: Technical Sessions of the Thirty-Sixth Annual Conference, Reinforced Plastics/Composites Institute: Working together for Strength: February 16-20, 1981
7.F RP/C RP/C 1982: Reinforced Plastics/Composites Institute 37th Annual Conference - Preprint: Technical Sessions of the Thirty-Seventh Annual Conference, Reinforced Plastics/Composites Institute: Leading from Strength: February 16-20, 1981
7.F SAHOO, SUSANTA KUMAR Ultrasonic Welding of Metal Sheets
7.F SAMPE SAMPE 1983: 15th National SAMPE Technical Conference: Volume 15: 20/20 Vision in Materials fot 2000: Marriott Inn, Cincinnati, Ohio, October 4-6, 1983
7.F SAMPE SAMPE 1989: 21st International SAMPE Technical Conference: Volume 21: Advanced Materials: The Big Payoff: Inns At The Park, Atlantic City, New Jersey, September 25-28, 1989
7.F SAMSONOV, G. V. Refractory Transition Metal Compounds: High Temperature Cermets
7.F SANFORD, R. J Principles of Fracture Mechanics
7.F SARKAR, RITWIK Refractory Technology: Fundamentals and Applications
7.F SCHACHT, CHARLES A Refractories Handbook
7.F SHABALIN, IGOR L. Ultra-High Temperature Materials I: Carbon (Graphene/Graphite) and Refractory Metals
7.F SHABALIN, IGOR L. Ultra-High Temperature Materials IV: Refractory Carbides III (W Carbides)
7.F SHALAEV, VLADIMIR M Nanostructured Materials: Clusters, Composites, and Thin Films
7.F SHAW, ROBERT W Overviews of Recent Research on Energetic Materials
7.F SHOENBERG, D Superconductivity
7.F SIMONDS, HERBERT R A Concise Guide to Plastics
7.F SIMONDS, HERBERT R Source Book of the New Plastics
7.F SITTIG, MARSHALL Producing Films of Electronic Materials
7.F SJÖSTRÖM, EERO Wood Chemistry: Fundamentals and Applications
7.F SMART/INTELLIGENT Smart/Intellingent 1990: U.S.-Japan Workshop on Smart/Intelligent Materials and Systems: March 19-23, 1990 Honolulu, Hawaii
7.F SMART MATERIAL Smart Material 1991: Proceedings: Workshop on Smart Material Systems and Structures: June 6, 1991, Eurogress Center, Aachen, Germany
7.F SMITH, R. A Wave Mechanics of Crystalline Solids
7.F SOURCE Source Book on Selection and Fabrication of Aluminum Alloys: A Comprehensive Collection of Outstanding Articles from the Industrial and Reference Literature
7.F SPALDIN, NICOLA A. Magnetic Materials: Fundamentals and Applications
7.F SPERLING, LESLIE HOWARD Interpenetrating Polymer Networks and Related Materials
7.F STEINBRÜCHEL, CHRISTOPH Copper Interconnect Technology
7.F STRUCTURES Structures 1969: Collection of Technical Papers on Structures and Materials: AIAA/ASME 10th Structures, Structural Dynamics, and Materials Conference: New Orleans, Louisiana / April 14-16, 1969
7.F STRUCTURES Structures 1970: Bound Volume of Technical Papers on Materials and Structural Dynamics: AIAA/ASME 11th Structural Dynamics, and Materials Conference: Denver, Colorado/April 22-24, 1970
7.F STRUCTURES Structures 1975 V1: A Collection of Technical Papers on Structures and Materials, Volume I: AIAA/ASME/SAE 16th Structures, Structural Dynamics, and Materials Conference: Denver, Colorado/May 27-29, 1975
7.F SUNTOLA T. Atomic Layer Epitaxy
7.F SYMMETRY Symmetry, Similarity and Group Theoretic Methods in Mechanics: Proceedings of Symposium held at The University of Calgary, August 19-21, 1974
7.F TANENBAUM, M Superconductors: Proceedings of Technical Sessions sponsored by the Electronic Materials Committee of the Institute of Metals Division, The Metallurgical Society, American Institute of Mining, Metallurgical, and Petroleum Engineers, New York, New York, February 18, 1962
7.F TAYLOR, A X-Ray Metallography
7.F TEIPEL, ULRICH Energetic Materials: Particle Processing and Characterization
7.F TILLEY, RICHARD J. D. Understanding Solids: The Science of Materials
7.F TOTTEN, GEORGE E Handbook of Aluminum: Volume 1: Physical Metallurgy and Processes
7.F TOTTEN, GEORGE E Handbook of Aluminum: Volume 2: Alloy Production and Materials Manufacturing
7.F TRACTON, ARTHUR A. Coatings Technology Handbook
7.F TRUELL, ROHN Ultrasonic Methods in Solid State Physics
7.F TURNBULL, MARK M Molecule-Based Magnetic Materials: Theory, Techniques, and Applications
7.F VAN VLACK, LAWRENCE H Elements of Materials Science and Engineering
7.F VEKSHIN, N. L Energy Transfer in Macromolecules
7.F VONCKEN, J. H. L. The Rare Earth Elements: An Introduction
7.F VOSSEN, JOHN L Thin Film Processes
7.F WICKS, ZENO W Organic Coatings: Science and Technology: Volume 1: Film Formation, Components, and Appearance
7.F WIGLEY, D. A Mechanical Properties of Materials at Low Temperatures
7.F WILLIAMS, BRADLEY EARL Surface Analysis and Microstructural Characterization of Diamond Thin Films: A Thesis
7.F WOOSTER, W. A Diffuse X-ray Reflections from Crystals
7.F WYCKOFF, RALPH W. G Crystal Structures: Volume 2: Inorganic Compounds RXn, RnMX2, RnMX3
7.F WYCKOFF, RALPH W. G Crystal Structures: Volume 3: Inorganic Compounds Rx(MX4)y, Rx(MnXp)y, Hydrates and Ammoniates